June 2023

HOW DOES A HURRICANE WORK?

The Hurricane™ Vacuum works differently than your household vacuum which commonly uses a bag to collect vacuumed debris.

All Hurricanes™ have a three-stage filtration system

Stage 1: The vacuumed material is pulled through the vacuum line by the air that is drawn through the vacuum pump. This air pulls the material toward the vacuum and then enters the cyclone separator/baghouse. The material decelerates as it enters and spins around in a cyclonic motion. This is called cyclonic separation.

Stage 2: The heavier material falls into the collection cone waiting to be manually or automatically discharged. The dust is carried with the air stream that moves upward toward the 37 pre-filter bags.

Stage 3: The air passes through the filters leaving the dust on the dirty side of the bag. The dust is then blasted off the filter by our reverse pulse filter cleaning system. This dust falls into the collection cone after it is knocked off the filters. The clean air that passes through the filter bags goes through a hose down to the blower safety filter.

This final stage of filtering catches any minute particles that may have slipped through the filter bags (Stage 2). After the air passes through the blower safety filter the air goes through the blower and then is discharged through an exhaust silencer. This exhausted air is then exhausted to an atmosphere scrubbed clean of dust and contaminants.

We turned a Hurricane™ inside out so you can see exactly how it works

THE DUSTY DANGERS OF CONCRETE CUTTING & GRINDING

Concrete cutting and concrete grinding are very dusty jobs in the construction industry, both posing a serious health risk to masons. Masonry blocks, bricks, and concrete slabs contain concentrated amounts of crystalline silica. When these materials are dry-cut they release silica-containing dust into the workers’ breathing zone. Regular exposure to this hazardous dust can lead to the development of silicosis, a deadly and incurable lung disease. It is estimated that roughly 250 construction workers die each year due to exposure to dangerously high levels of silica dust.

Masons and construction workers face various levels of exposure to silica dust depending on the task being performed. For instance, there is less potential for overexposure for masons who perform wet tasks such as laying blocks in mortar or wet cutting concrete.

On the other hand, masons who dry cut concrete blocks and slabs regularly face exposures that are up to 10 times OSHA’s defined permissible exposure limit (PEL). Dry-cutting tasks increase the likelihood that an employee will develop a lung disease over a period of 10 or more years.

While dry cutting increases the likeliness of developing a lung-related illness, the most dangerous task affecting the health of masons is grinding out deteriorated mortar from brick or concrete structures. Exposures from this type of work can exceed 50 times the OSHA PEL and can cause lung diseases to cultivate over a period of several months to 10 years.

Work Practices to Control Silica Dust Production

Several approaches can be taken to help protect construction workers against the dangers of airborne silica dust. Control methods and work practices that reduce dust accumulation in concrete cutting and grinding include:

  • Wet Cutting (Water Spraying) – This engineering control helps to eliminate silica dust from ever becoming airborne and is the most efficient method of dust control in concrete cutting and grinding. Saws and grinding equipment should be fitted with a wet-cutting port, or alternatively, a portable water tank or cart can be supplied. Masons should create a plan prior to arriving at the job location to make certain that the resources and manpower required are accessible for successful wet-cutting projects.
  • HEPA Vacuum & Exhaust Ventilation Systems – When dust cannot be eliminated at the source, industrial vacuums and exhaust ventilation systems are extremely useful tools. These systems can suck up dust as it forms and can be extremely beneficial during job site clean-up. Vacuum systems should be equipped with a high-efficiency particulate air (HEPA) filter that prevents collected dust from escaping the vacuum system.
  • Training – Employees should receive thorough training on the dangers of silica dust. Training should cover prevention and control methods, respiratory protective equipment, as well as cleaning methods when work is completed.

Open, Enclosed, & Confined Spaces: Half vs. Full Faced Respirators

Depending on the layout of the job site, masons and construction workers are required to wear respiratory protective equipment (RPE) where preventative work practices and control methods are not effective enough on their own. Respirators should be properly fit tested prior to use and a respiratory protection program should be implemented to guarantee that they are used safely and appropriately. Listed below are the three main types of respirators that can be used depending on the worksite:

  • Disposable Dust Respirators – These can be used in areas where exposures are up to 5 times the OSHA PEL. They are often used by masons who block run, build scaffolds, or mix mortar. These masks must be NIOSH-approved in order to be deemed safe enough to mitigate exposure. Frequently they are used in open spaces and on jobs where dust accumulation is relatively low.
  • Half-Face Dust Respirator – Half-face respirators are safe for exposures up to 10 times the OSHA PEL. They should include dust cartridges that are cleared regularly. Typically these respirators are used in open spaces, but can also be used for some projects completed in enclosed spaces.
  • Full Face Dust Respirator – Finally, full-face dust respirators can protect workers from exposure to up to 50 times the OSHA PEL. These are required when a mason is tasked with grinding mortar prior to tuck-pointing. Typically these are used in enclosed and confined spaces where dust can accumulate quickly and in large quantities.

THE IMPORTANCE OF AN INDUSTRIAL VACUUM TO THE OIL & GAS INDUSTRY

The oil and gas industry involves different processes, from production to transportation and processing. Petroleum producers, refiners and transporters rely on oilfield equipment that is durable and provides high performance to complete their tasks at optimal efficiency. That is why removal of sludge from frac and oil tanks is a critical maintenance practice when it comes to transporting material.

The buildup of sludge can reduce oil tank capacity and have corrosive effects that damage oil tanks. Oil and gas drilling sites require powerful, dependable, and versatile industrial vacuums to effectively clean these vessels inside and out. At Industrial Vacuum, you will find a variety of solutions to remove sludge from oil tanks for your unique oil and gas cleanup needs. In this article, we will dive into what to look for when choosing an industrial vacuum to add to your oilfield services equipment lineup.

Oilfield Equipment Requirements for Oil & Gas Cleanup

  • Heavy Duty: 

Industrial strength vacuum cleaners are necessary when dealing with oil sludge. Our Hurricane™ models are some of the most powerful vacuum systems available ranging from 25 hp to 500 hp and from 500 CFM to 5660 CFM.

  • Portable

Trailer mounted vacuum loaders offer a compact design and maneuverability to pull to different job sites- no CDL driver required! Our skid mounted vacuums are built in a compact design to fit into a standard shipping container.

  • Versatile

When selecting oilfield equipment for oil and gas cleanup, look for an industrial vacuum that can vacuum both wet and dry material. Equipment that can automatically discharge material, such as frac sand, into a dump truck, dumpster, or container offers quick and easy disposal.

  • Cost effective

Industrial vacuums provide great versatility and power at the fraction of the cost of a vacuum truck. If you are looking for oilfield rental equipment, Industrial Vacuum offers vacuum rentals that are completely serviced and ready for immediate delivery to your job site.

Whether you are looking to add an industrial vacuum to your oilfield services equipment lineup or looking for oilfield rental equipment to clean your frac and oil tanks, our experts at Industrial Vacuum can help you find a solution for your oil and gas cleanup needs. Contact us today for more information!

INDUSTRIAL RENTAL EQUIPMENT: THE ADVANTAGES & BENEFITS

At Industrial Vacuum Equipment, we are known for our extensive rental equipment. We pride ourselves in giving the option to not only purchase a vacuum or dust collector but also rent one of our machines for your cost-benefit. We understand that when looking at your balance sheets, exploring the benefits of renting or leasing is an important way of assessing your investment in an industrial vacuum, dust collectors, and our used equipment.

The application use of industrial equipment varies widely from industry to industry, which is why we offer equipment serving eleven different application uses. Our application uses are, but not limited to:

For each of these applications, we understand the benefits of renting or leasing industrial equipment versus buying, but do you? Below we have outlined ten of the top reasons to rent industrial equipment for your next big project. These top ten benefits are:

  1. You will save money by not purchasing and paying for equipment fixes
  2. You will avoid the transportation costs and cost of storing an industrial machine
  3. You will save on overall tax time
  4. Your finances will be looked at differently by banks due to borrowing instead of owning
  5. You will save time by ensuring a piece of equipment will arrive at a site without issues
  6. You will have more advantages when it comes to new project opportunities
  7. You can maintain a competitive advantage by having the most updated equipment
  8. You can gain flexible options when it comes to equipment
  9. You can preview equipment prior to purchasing
  10. You can have more hours for convenience and maintenance on equipment

The top 10 reasons to rent industrial equipment

  1. Decrease Expenses

When it comes to equipment, especially large industrial-grade equipment, it can be an expensive capital cost to profit the same year after purchasing equipment. Upon purchasing an industrial machine, your company’s money becomes tied to that machine, resulting in a profit based on the longevity of the machine itself. When renting a piece of equipment, there is a charge up-front, but it results in no money ties, and a profit gain consistently.

With this decrease initially, renting a piece of equipment will also decrease the long-run expenses that come with maintaining an industrial machine. Machines need regular service, operation, and routine checks to ensure their performance, and ability to keep up with their required application use. You can typically gauge the expenses of services on a machine, resulting in the overall success of renting a piece of industrial equipment.

  1. Avoid Transportation & Storage Costs

Storing a piece of equipment is an expensive endeavor. To ensure the piece of equipment is not exposed to sun damage, winds carrying rain, or even driving rain damage, you would need proper storage or transportation equipment. Storage and transportation equipment can be another added expensed to purchasing a piece of equipment. We ensure a piece of equipment is at its desired location at the correct time, saving you time and efficiency with completing your project at hand.

  1. Save on Tax Time

Typically, purchased equipment is going to be taxed throughout its lifetime, while rental equipment is a deductible expense. These rental expenses are much more financially flexible than the expense of purchasing a piece of equipment. Sometimes, companies can gain a project expense from renting a piece of industrial equipment.

  1. Maintain a Strong Bank Image

The internal revenue service is known for looking at rental equipment in an extremely different way than owned industrial equipment. When companies think about bank balance sheets, they understand that owned assets are looked at as a liability, while rental equipment, not belong to the company directly, is not considered an asset. In turn, rental equipment will ensure your company maintains a strong bank image.

  1. Ensure Equipment Performance

In varying applications, such as construction, a piece of industrial equipment will be required to begin the construction process. When renting a machine from Industrial Vacuum Equipment, you can ensure it will not stall during use, and it will arrive on time saving your project time and money. Rental equipment will ensure performance while in use and will be dropped off and picked up when requested by your company. Your company can trust our word on the success of our equipment because of the extensive service we provide to our rental equipment.

  1. Maintain New Opportunities

Renting industrial equipment allows for an increased business opportunity without the cost of maintaining, storing, and initially purchasing the industrial equipment. Once your company rents a piece of industrial equipment, you will understand the economic benefits, and this can lead to new opportunities and projects that you did not consider before. Whether you are mining and need an industrial dust collector, or need a hurricane roof rock removal vacuum, we can cater our machines to your application needs.

  1. Ensure Competitive Nature

We understand it can be difficult to match up to your competition, especially when they are consistently pushing the limits with new industrial equipment. To sharpen your competitive edge, renting will allow you to successfully provide the same equipment as your competition for a cheaper value. You can request rental equipment, while understanding we provide a diverse range that aligns with the bigger companies.

  1. Gain Flexibility with Equipment

If your company chooses to purchase a piece of industrial equipment, you will be tied down to what that machine is capable of accomplishing. When renting a piece of industrial equipment, you are now entering a realm of possibilities. One day you could be using one of our hurricane industrial vacuums for roof rock removal, and the next day you could be using our dust collectors at your construction site. While these are only two options for application use, our various nozzles, hoses, and other application features can enhance our equipment in varying industries.

  1. Preview Equipment Prior to Purchase

We understand the hesitation of wanting to purchase a piece of industrial equipment. This hesitation comes with not understating if its capability is right for your project needs. Renting a piece of equipment will give you insight into how successful your purchased equipment will perform when conducting your projects. Give yourself more insight into how equipment performance will work on your projects by renting that piece of equipment from us at Industrial Vacuum Equipment.

  1. Gain Maintenance Hours

Equipment requires an immense amount of managing due to its routine fluid checks, service, schedules, testing, and routine maintenance. Without needing to maintain a piece of equipment, you will gain these hours back to use on projects, scheduling of future projects, and various other needs within your facility. Give yourself more flexibility by renting a piece of equipment today.

While there are several more reasons why renting equipment is a smart investment on your companies behalf, we encourage you to consider the possibilities and ask us if you have any more questions on our equipment, and rental processes. As always, contact us for inquiries, or rental quotes.

HEPA VACUUMS AND OSHA’S STANDARDS

We’ve spoken before to the performance, and reliability of HEPA filtration in industrial vacuums. HEPA filters are known for their ability to capture airborne particulates as small as 0.3 microns and contain them resulting in a successful and safe disposal process. It is crucial to contain these particulates considering they are small than the human eye can see. Being smaller than the human eye, we rarely know these particulates are present within a facility forcing us to be more susceptible to health defects.

Industrial Vacuum Equipment’s and Vactagon’s HEPA filters are known for being able to capture 99.97% of these particles. With this trapping rate, our HEPA filters can protect, and combatting the hazards present within facilities, before they can deplete workers’ health.

HEPA filters are successful in their particulate trapping process due to the three stages of a HEPA filter. These three stages are:

Stage 1 – Impact: Particles are trapped by the impact.

Stage 2 – Interception: Stopped by an individual fiber.

Stage 3 – Diffusion: Redirected to nearby filter fibers.

Read more about the stages here.

The HEPA filtration innovative was pushed specifically once the threats of airborne crystalline silica dust became apparent. With silica dust being such a threat, as well as other varying airborne particulates, it is important to protect your facility and workers.

Consider using one of our Vactagon Vacuums with a true HEPA filter. These filters provide a sense of relief when putting workers in comparable environments, knowing whatever hazard was present before can be minimized. Contact us to purchase your own HEPA filter, and check out our infographic on the motion of particulates through a HEPA filter.

OSHA & EPA ON CONSTRUCTION EQUIPMENT RENTAL & LEASING

Renting industrial equipment is an investment that cannot be properly justified if the equipment is not up to safety standards and regulations within your industry. In the construction industry, if a piece of machinery or heavy equipment breaks down, or you come across a piece of your machinery that breaks, the need for renting or leasing a piece of equipment is crucial to the success of your project.

We at Industrial Vacuum Equipment have always taken pride in ensuring our purchased and rented equipment is up to the standards set by OSHA, the EPA, and various other equipment safety regulations. We have taken the time to outline those standards set up by OSHA and the EPA in hopes of showcasing to our loyal renting customers, why to rent a piece of industrial equipment from Industrial Vacuum Equipment.

OSHA on Heavy Construction Equipment Rental and Leasing

Standard 7353 by OSHA was created for a space of miscellaneous rental and leasing equipment to live. This document outlines what companies can rent or lease to consumers. For instance, OSHA outlines four within this specific standard:

While these guidelines are for the type of machinery we can rent/lease to businesses, it is important to understand that OSHA has a set of divisions in which businesses must comply. The SIC Division Structure goes as follows:

  • Division A: Agriculture, Forestry, and Fishing
  • Division B: Mining
  • Division C: Construction
  • Division D: Manufacturing
  • Division E: Transportation, Communications, Electric, Gas, and Sanitary Services
  • Division F: Wholesale Trade
  • Division G: Retail Trade
  • Division H: Finance, Insurance, and Real Estate
  • Division I: Services
  • Division J: Public Administration

With our equipment up to the safety standards of Division A machinery, we can ensure that all rental and leasing equipment will perform successfully while on your construction or job site.

The Advantages of Our Rental Equipment

When looking at the various application uses of our equipment, you may not necessarily see your industry. However, Industrial Vacuum’s rental equipment can perform in a plethora of industries, you just need to understand our equipment’s application use.

Rental equipment from Industrial Vacuum Equipment is built to withstand even the most rugged, and challenging environments due to our continual maintenance and testing of each machine. The benefits of choosing our industrial rental equipment are, that we:

  • Offer flexible weekly, monthly, and longer rental agreements
  • Our machines are equipped with tackling large jobs that require varying application use
  • Our fuel-efficient engines meet the U.S. EPA diesel emissions standards
  • Our equipment and team is ready to assist you in any issue that may arise on your construction, or job site

Consider renting or leasing a piece of industrial equipment through Industrial Vacuum today. We promise you will not be disappointed with your rental, and our equipment will assist in the overall success of your project at hand. Contact us today for more information on our rental equipment.

INTRODUCING THE 20,000 CFM DIESEL VENTILATION BLOWER

Air quality plays a significant role in creating a proper work environment. Workers exposed to pollution face several risks that affect both their health and productivity. Industrial blowers create air movement within enclosed areas, replacing contaminated air with fresh air. In doing so, workers are able to perform without the risks associated with air contaminants.

Job sites such as tunnels, mining and elevator shafts require powerful ventilation in order to keep air quality high. That’s why Industrial Vacuum developed an industry-leading, powerful centrifugal blower that boasts many of the features needed to get the job done right. Let us introduce you to the 20,000 CFM Diesel Ventilation Blower.

When the work environment is tight in space, the 20,000 CFM Industrial Blower works to keep the air circulating, protecting workers. Its 153ft in length, 98ft in width, 109ft in height and weighs 4,800lbs – providing durability that can handle the toughest tasks.

Industrial Blower with Maximum Performance

Offered in diesel only, the 20,000 CFM Industrial Blower Fan is equipped with an 80HP 4.5L engine with a lockable steel enclosure. Its air volume is a high 20,000 ACFM at 16” W.G, enabling it to control the quality of air in much tighter spaces.

Superior Strength and Durability

Build quality paired up with maximum performance creates a piece of equipment that leads an industry to success. Weighing in at 4,800lbs, the 20,000 CFM Blower boasts a heavy duty steel construction with fork pockets and a single point lifting eye. Our diesel ventilation blower can endure all tough work environments while providing safe air for workers.

Options to Meet Preferences

Standard equipment on the 20,000 CFM ventilation blower makes this machine consistent and efficient with every use. Features like the pintle-style, DOT-approved trailer, electric brakes and a 99 gallon fuel tank makes it convenient to transport and operate. In addition, several options are offered based on exact needs. Additional options include:

  • Cummins or Kubota engines
  • Skid base with fork pockets
  • 480 volt, 3 phase electric motor
  • Emergency air shutoff valve
  • Silencer (intake or outlet)
  • Ducting and hose accessories
  • Damper (inlet or outlet)
  • Sound package for quiet operation
  • Explosion proof motor and controls

Moving Forward with the 20,000 CFM Diesel Ventilation Blower

Work environments that are confined to a small space require a certain level of air control in order to meet OSHA’s health standards. The 20,000 CFM Centrifugal Blower by Industrial Vacuum is capable of providing the air control needed in almost every industry! Our team of experts are always available to help decide if this system meets your requirements as well as determine the options suited for your needs. See additional information about the 20,000 CFM Diesel Ventilation Blower or request a quote today! Please feel free to contact us directly with any additional questions.

WHAT SETS OUR CYCLONE DUST COLLECTION SYSTEM APART?

Yet another option for all our clients’ dust collection needs The PDC-2500. With Industrial Vacuum’s new Filt-Aire 2500 CFM Portable Cyclone Dust Collection System, also known as the “PDC-2500”, dust-intensive areas don’t stand a chance.  This model is the perfect solution for smaller jobs and provides an economic solution to a wide range of dust problems.

The Need for a New Portable Construction Dust Collector

Industrial Vacuum is always working to meet the ever-changing needs of our clients. Health and safety construction dust collector standards have become stricter to protect the well-being of staff members exposed to dangerous and hazardous materials on a day-to-day basis.  We saw this in September of 2017 when OSHA required all construction companies and contractors to comply with OSHA’s updated Respirable Crystalline Silica Standard. The new standard enforces professionals in this line of work to implement various control methods – such as construction dust collectors – to reduce dust production and protect the health and well-being of their staff.

While OSHA has listed several control methods to help to prevent the build-up and creation of dust, these methods are not always perfect and typically leave room for some dust to escape allowing it to settle on surfaces within the workspace. To ensure that all dust has been removed from the work area, these spaces should be cleaned with an industrial vacuum or cyclone dust collection system.

We found that construction and contracting clients needed a new unit to remain compliant under the restructured regulation. With many of these contractors using smaller tools like grinders, concrete saws, and floor sanders, our line of large cyclone dust collection system did not make sense. Contractors needed a unit that was small, portable, and easy to transport from job to job if need be. That is where we stepped up and engineered our newest construction dust collection system: the Filt-Aire 2,500 CFM Portable Cyclone.

Models to Meet Your Working Environment

Our Filt-Aire 2,500 CFM Portable Cyclone Dust Collection System is available with two different types of power sources: electric and gas. The electric-powered model was constructed for indoor projects or where the user has an electric power source making it perfect for cleaning up paint, silica dust, and insulation projects. On the other hand, our gas-powered units are built for projects where the user does not have access to electric power. This model is ideal for landscapers, roadside, remote locations, and construction dust collectors.

Portable Construction Dust Collectors Built for Numerous Applications

For the construction industry, the PDC-2500 is the perfect solution for projects that produce large quantities of dust as well as those that emit dangerous fumes. Below are several job functions within the construction industry that face these issues – and how they occur:

Sandblasting – Sandblasting involves cleaning, roughening, or smoothing the surface of another material by forcing solid particles across the surface at high speeds. This is an extremely abrasive process and is performed by using a jet of sand that is usually driven by steam or compressed air.  When finished, there is often a layer of fine sand or dust that lines the work area. Our PDC-2500 Cyclone Dust Collection System works perfectly as a sandblasting vacuum and can collect these fine particles as they are produced. It also can be used while abrasive blasting to capture the airborne dust created and keep the visibility and dust exposure to a minimum.

Concrete Cutting & Grinding – While concrete grinding and cutting are different, they are very similar in terms of their result and the need for construction dust collection clean-up. Cutting concrete, as well as similar materials such as asphalt, brick, and mortar is a method often used to create entryways and for new building construction. Concrete grinding is often used to smooth and repair worn-out and impaired sidewalks, roads, parking lots, and highways offering immediate enhancement and surface evenness. Most grinding and polishing tools have hose connections on them for capturing the dust and debris. The Cyclone Dust Collection System can be adapted to fit almost any piece of equipment.

Once complete, this type of work leaves a layer of dust and fine sand often containing respirable crystalline silica or other hazardous substances that impede the overall wellbeing of employees. Our Cyclone Dust Collection System is equipped with an adjustable 55-gallon drum adapter and dust & debris dropout drawer that makes it possible to clean up an entire workspace without needing to empty the drawer every few feet. Once clean-up is complete, the dust and debris dropout drawer can be easily removed, emptied, and cleaned allowing it to be ready for use again in minutes.

Metalworking & Fume Extraction – Another area of construction that can negatively affect the health of employees is metalworking. There are several types of metalworking but two of the most common are welding and soldering. Both methods involve joining together two pieces of metal by heating the surfaces. Soldering requires heating two pieces of metal and joining those pieces together with a joint in the middle, while welding requires heating the pieces of metal to their melting point and pressing them together until they are completely fused.

These methods extract fumes like nitrogen dioxide, carbon dioxide, carbon monoxide, and several other hazardous gases. If employees are subjected to prolonged exposure to the fumes put off by welding and soldering, they increase their risk of lung damage and various types of cancer, including lung, larynx, and urinary tract. Additional adverse health effects from certain fumes may include stomach ulcers, kidney damage, and damage to the nervous system. Maintaining clean air is extremely important and often requires the help of an industrial fume extraction system like the PDC-2500 Cyclone Dust Collection System.

With electric and gas-powered models built with a four-stage HEPA filtration system, our Filt-Aire Portable Cyclone Dust Collection System makes clean-up within the construction industry a breeze. From fine particles to dangerous fumes, the PDC-2500 can collect hazardous materials and stop them from contaminating the air and negatively affecting employee health.

Need more information? Have you found yourself facing a project that will entail a mobile cyclone dust collection system? If yes, contact a sales member at Industrial Vacuum today! Our new PDC-2500 construction dust collector is available for purchase or rent and we would be happy to answer any questions you may have.

DOES MY CONSTRUCTION PROJECT NEED AN INDUSTRIAL DUST COLLECTOR?

The construction zone is oftentimes overlooked when it comes to dust collectors due to the assumption of the air quality surrounding the construction zone. When looking at a construction zone, it is assumed that workers are consistently breathing in the fresh air surrounding them outside. However, this very assumption is what is threatening workers safety, workability, and, most importantly, health. Concrete dust and welding dust are two major players on these sites – both capable of harming and threatening any workers health.

Concrete Dust

Concrete dust is commonly known by the silica dust it contains. OSHA’s 2018 silica dust compliance requires contractors and construction sites to adopt engineering control methods to ensure workers safety from airborne silica dust exposure.

Maintaining the dust produced when cutting concrete is not an easily manageable task. The dust cleanup process historically has consisted of sweeping, wetting down, or, sometimes, allowing the dust to blow away. Each of these is an extremely dangerous practice that will result in threatening workers safety and the safety of those around the work site. Sweeping, forces the already settled dust to become active in the air, increasing the chance to inhale. The process of wetting down dust is a dangerous one because dust flies in the air behind the water truck putting those around the truck at risk of the silica dust now airborne. Finally, allowing dust to blow away from a worksite is NEVER recommended.

Connecting a hose to your dust collection system allows for a cleanup process that moves with ease and safety. Following these industry practices will help you along the way:

  • Keep the dust collection hose free of debris, allowing for full capabilities
  • Move the dust collection system as close as possible to the dust producing zone
  • Empty dust collector systems using a super sack or bag to reduce exposure
  • Avoid silica dust exposure when discharging dust, cleaning equipment, or replacing filters

For more information on OSHA’s silica dust guidelines:

Welding Dust

Hexavalent chromium, a metal found within weld dust is regulated by OSHA in hopes of protecting workers from particulate exposure. Like airborne silica dust, hexavalent chromium is a carcinogen due to its extremely small size and capabilities to travel deep in the body.

Welding on a construction site is not typically looked at as a life-threatening practice. However, portable dust collection systems should be considered when welding is occurring on a construction site. A dust collection system can capture a fair amount of the particulates produced from welding, thus protecting the workers within the welding area.

Our Line of Industrial Dust Collectors

Our line of portable dust collectors are made for any construction purpose you may think of. They range in size, capabilities, and versions. If you’re contracting a construction site right now, and have not considered using an industrial dust collector, you’re not properly considering the benefits of a dust collector for your workers and protecting them from the hazards they are exposed to.

Check out our line of portable dust collectors to protect your workers from the “what ifs,” and contact us if you need additional information on which one of our top of the line dust collectors are right for you.